PEVOLON® is a thermoplastic polyamide. Depending on the wheel properties and sizes required, different polyamide granulates are used for production. PEVOLON® wheels are non-marking and are characterized by high abrasion resistance, low rolling resistance and high load capacities.

Due to their high melting point, constant operating temperatures of about 80-90º C (176-194º F) do not cause any material deformation. The indicated load capacities apply for standard operating environments (65% relative humidity at 20º C {68º F}) and ambient temperatures between -40º C and +35º C (-40º F and 95º F).

PEVOLON® wheels are also widely used in food processing and pharmaceutical environments.

The electrostatic charges are discharged through the entire wheel and entire contact surface respectively. Contrary to other electrically conductive polyamides and rubber, electrically conductive PEVOLON® is non-marking.

PEVOLON® wheels are used in caster systems from 50 kg to 4,000 kg (110-8,800 lbs) load capacity.

There is a Rader Vogel® PEVOLON® Wheel for every Category 2 & Category 4 caster rig - standard or stainless steel - in use in the USA. Call Acorn™ for more information.